Insupen Pro Device

Pack Of: 1

Product Type: Insulin Device

Outer Packaging Type: Mono cartoon

Ideal For: Unisex

Product Information:

Insupen Pro is a reusable pen that can deliver insulin doses from 1 unit (0.01 mL) to 60 units (0.60 mL) in increments of 1 unit (0.01mL) with insulin preparations of 100IU/mL. Insupen Pro is available in green color. Insupen Pro to be used only with Prefilled 3 mL (Insulin products 100 IU/mL) cartridges of Biocon's Insugen-R Refil, Insugen-N Refil, Insugen-30/70 Refil, & Basalog Refil as prescribed by your health care professional.

Each Insupen Pro Device pack contains (Apprpx):

1 INSUPen Pro, 1 Pen case, 1 Insulin label sticker, 1 User Guide, 1 warranty Card.

Features:

• Insupen pro is easy to use and reusable.
• Insupen Pro is to be used only with prefilled 3 ml insulin cartridges of Biocon's Insugen-R Refill, Insugen-N Refill, Insugen-30/70 Refill & Basalog Refill.
• It can deliver insulin doses from 1 unit (0.01 ml) to 60 units (0.60 ml) in increments of 1 unit (0.01 ml) with insulin preparations of 100 IU/ml.

Usage Direction:

• Read the entire user guide thoroughly before using the new Insupen Pro even if you have used other similar delivery systems before.
• Follow the instructions carefully while using your Insupen Pro.
• Take Insupen Pro out of the case and Pull off the pen cap.
• Detach the cartridge holder by twisting and pulling gently away from the pen with a "click".
• Grip the pen body in one hand and gently push back the plunger rod with the other hand into the injection mechanism section of the pen and make sure the plunger rod is fully pushed back.
• Remove the cartridge from the pack and Check that the cartridge is not cracked or broken.
• Bring the cartridge to room temperature and Roll the cartridge between your palms 10 times. These steps should be done with the cartridge in a flat (horizontal) position.
• Hold the cartridge in your hand and then turn the cartridge up and down between positions so the glass bead moves from one end of the cartridge to the other.
• Do this at least 10 times. Repeat step 5 until insulin looks uniformly white and cloudy.
• Insert the cartridge into the cartridge holder with the metal end first.
• Twist the pen body back into the cartridge holder, this is attached properly when you again hear a "click".
• Attach a new Needle Wipe the front end of the cartridge with an alcohol swab.
• Remove the protective seal from the outer needle cap.
• Carefully pull off the inner needle cap and throw it away And you may see a droplet of insulin at the needle tip.
• Checking the insulin flow.
• Remove the air bubbles.

Safety Information:

• Consult with the physician if you are allergic to any of the components of this medicine.
• If find any other complications, inform the physician immediately.
• Do not share your pen with others. This pen is intended and recommended for single use only.
• Do not use other brands of insulin cartridges with Insupen Pro (recommended for Biocon’s cartridges only) to avoid inaccurate dosing.
• Always use a new sterile disposable hypodermic needle for each injection. Reusing a needle, which is designed for single use will cause infection and contamination of medicine.
• Check the expiry date of the needle on its protective seal, prior to use. Do not use an expired needle.
• Do not attempt to pull out the needle by hand.
• The needle could bend/fall off if not kept straight while attaching.
• When turning the dose knob to set the dose, be careful not to push the injection button, as insulin will come out.
• Do not use your Insupen pro if any parts appear broken or damaged.
• Please consult with the physician during pregnancy and lactation.
  

Storage Condition:

• Keep Insupen Pro away from moisture, dust, direct sunlight, and places where the temperature may get too high or low.
• When a cartridge is inserted in INSUPen Pro, store your INSUPen Pro as mentioned in the package insert that comes with the cartridge.
• Storage Temperature Limit is 2°C -40°C.
• Keep out of reach of children.